Synthetic Primer Coal Tar Enamel - Type B

Description

ShaliPrime CTE (formerly known as JetSet Primer Type B) is a cold-applied, fast drying Synthetic Primer consisting of Chlorinated rubber, Synthetic plasticizer and solvents. ShaliPrime CTE is quick-drying and hence coating and wrapping application can be finished within minutes. ShaliPrime CTE produces a suitable and effective bond between the metal and subsequent coating of ShaliEnamel P/R. It conforms BS : 4164 and AWWA C203 (latest).

Characteristics

Application

• Primer coat for hot applied coal tar enamel coating  on steel pipe lines

• Primer for coal tar base tape application

Advantages

• Excellent bonding of Coal Tar Enamel and pipeline surface with improved electrical insulation properties.

• Fast drying time, Excellent coverage

• No string formation during airless spray

Application Methodology

• Free pipe surface from chloride contamination which, if any, should be removed by water spray.

• Use adequate air separators to effectively remove all oil and moisture from air supply into blaster.

• Thoroughly clean pipe surface by blasting to remove all rust, scale and other impurities exposing base metal all over to a grayish matt appearance to SA 2 ½. Before blast cleaning by shot and grit, the surface should be free of foreign matter, dust, oil or grease

• Pre-heat pipe to 40-50 OC.

• The primed pipe should have a uniform film of primer, free from runs, drips or missed spots. It is most important that the steel surface of the pipe should be at least 3 °C above the dew point before application of any protective coating.

Health & Safety

• Use goggles and hand gloves during application

• Clean hands with warm soap water after application

Packing

Available in 20 L and 200 L steel drum.

Storage

Keep in cool and dry place under shed away from heat.